CANBUS Parking Sensor Interface - From Soundlabs Group in BALWYN, Victoria for sale

Many of the vehicles today utilise CANBUS (also known as CAN; CAN-BUS; CAN BUS; C-BUS) to transmit the specific data and conditions between devices. It is designed to aid fitting of after-market parking sensors or other systems by providing commonly required signals. Simply connect and go, no complicated programming required. This interface provides a solution to the problem of de-activating / activating front parking sensors when a vehicle is being driven above / below a set speed (approx. 6 mph - 9.6 km/h). It also provides a reverse signal output for rear parking sensors. The Parking Interface is compatible with 40 vehicle manufactures covering 250+ different models.
Features built-in diagnostic LEDs to indicate CAN Bus status. The output on the interface is negative switching (0V or ground), by this we mean below 6mph / 9.6km/h the negative is present (the circuit is complete) and above 6mph / 9.6km/h the negative is disengaged or taken away (the circuit is broken). It does not switch between 0V and 12V.
Applications:
?Parking Sensors
?To switch off equipment above a set speed on plant equipment
?Turn off 'Alley lights' automatically (Alley lights are side vehicle lights such as used in taxis, police and emergency vehicles)
?The module works with any of the cars or trucks / buses (J1939) listed and can be transferred between vehicles. The one interface has all the list programmed in!
Details:
The CBPI Parking Interface features built-in diagnostic LEDs to indicate the CAN Bus status. After power-up:
?Stage 1: Both LEDs light for approx. 1 second.
?Stage 2: Green LED on while the interface listens for CAN Bus data.
?Stage 3: Red LED indicates CAN has been detected. The CANBUS Parking Interface is now detecting the vehicle type.
?Stage 4: Once the vehicle type is automatically determined, the Green LED will light when Speed Switch output is active and the Red LED will light when reverse is active. (Please note that not all vehicle CAN systems carry the reverse signal data).
Please note: If LEDs do not follow the above sequence it is still advisable to drive the vehicle to see if a speed switch signal is still actually being produced. It is possible that some vehicles will perform in a different manner.
Vehicle Coverage (Note functions vary with vehicle):
Please note: All connections are for guidance only and to the best of our knowledge; some Australian models may be different. We cannot be held responsible for changes made by the vehicle manufacturer, they only act as a guide for fitting.
?ALFA ROMEO - 147, 156, 159 166, MiTo
?ASTON MARTIN - DB9 (2006+), V8 Vantage (2006+)
?AUDI - A1, A3, A4, A5, A6, A7, A8, Q5, Q7, R8
?BMW - 1-Series, 3-Series, 5-Series, 6-Series, 7-Series, X1, X3, X5, X6, Z3, Z4
?CADILLAC - BLS, BTS, CTS, TS, XLR, SRX, STS, Escalade
?CHEVROLET - Captiva, Cobalt, Collarado, Cruze, Epica (2007+), Equinox, Impala, Suburbon, Tahoe
?CHRYSLER - 300C, Crossfire, PT Cruiser (2006+), Sebring, Voyager (2008+)
?CITROEN - Berlingo, C2 (2007+), C3, C4, C4 Picasso, C5, C8, C-Crosser, Dispatch (2007+), DS3, Nemo, Picasso (2005+), Relay (2006+), Xsara
?DODGE - Avenger, Caliber, Journey, Nitro, RAM (2006+)
?FERRARI - F430 (2006+)
?FIAT - 500, Brava/Bravo, Croma, Ducato (2006+), Fiorino, Grande Punto, Panda (2005+), Punto (2005+), Scudo (2007+), Stilo, Ulysse (2005+)
?FORD - Fiesta, Fusion, Focus, Focus C-MAX, F150 (2006+), Galaxy (2006+), KA (2006+), Kuga, Mondeo (All models), Mustang GT, S-MAX, Transit (2006+), Transit Connect (2006+)
?HONDA - Accord (2005+), Civic (2006+), CR-2, CRV (2007+), FRV (2007+)
?HUMMER - H2 (2008+)
?HYUNDAI - Tucson
?IVECO - Daily (2007+)
?J1939 - Suitable for commercial vehicles such and trucks and buses / coaches using SAE J1939
To many to list. Shipping extra.